КАТЕГОРИИ
Your Cart

С използването на този сайт Вие се съгласявате с политиката за използване на "Бисквитки"!

Mackie HR626

Mackie HR626
Mackie HR626
Mackie HR626
Безплатна доставка
Mackie HR626
Mackie HR626
Mackie HR626
Mackie HR626
1,350.00лв.
  • Наличност: В наличност
  • Модел: HR626
 Кликни за схеми на изплащане:
tbi_logo bnp_logo unicredit_logo
Доставка
Бърза доставка и БЕЗПЛАТНА при поръчки над 199лв.
Преглед
Можеш да прегледаш пратката, преди да я приемеш от куриера
Гаранция
Всички продукти са със стандартна 2 години гаранция
Връщане
Имаш възможност да върнеш или замениш продуктите си до 30 дни
Лизинг
Купи на изплащане с 1% оскъпяване
Консултация
Професионална консултация по телефон и онлайн чат
Low-frequency driver
 Number of drivers- 2
 Diameter -6.7 inches (170 mm)
 Sensitivity (2.83V, 1m) -89 dB SPL
 Nominal Impedance -8 ohms
 Voice Coil Diameter -1.25 inches (32 mm)
 Power Handling (Long Term/Program) -50/150 watts
 Frequency Range - 38Hz to 6kHz
 Frame - Die Cast Aluminum
 Magnet - Ferrite
 Bucking Magnet (Shield) - Ferrite
High-frequency driver
 Sensitivity (2.83V, 1m) - 91 dB SPL
 Nominal Impedance - 6 ohms
 Power Handling (Long Term/Program) - 20/50 watts
 Frequency Range - 1.6kHz to 22kHz
 Diaphragm/Suspension - Aluminum/Impregnated Cloth
 Voice Coil Diameter - 1.0 inch (25.4 mm)
 Magnet - Ferrite
 Bucking Magnet - Ferrite
Wave Guide  Frequency Response - 2.5kHz to 20kHz, ±2dB
 Mouth Size - 6.13 inches diameter (156 mm)
 Horizontal and Vertical Coverage - 120°, ±10° 3kHz to 20kHz
 Passive Radiator
6-inch x 9-inch (152 mm x 228 mm) mass-loaded elliptical flat piston with variable thickness filleted edge rubber surround.
Crossover Section Crossover Type - Modified Butterworth, 18 dB/octave @ 1.8kHz
Acoustic Section Free-Field Frequency Response - ±1.5dB, 42Hz to 20kHz
Lower cutoff frequency - -3 dB @ 40 Hz
Upper cutoff frequency - -3 dB @ 22 kHz
Sound Pressure Level at 1 meter, -7.5dBu into balanced input - 100 dB SPL @ 1m
Maximum peak SPL per pair - 118 dB SPL @ 1m
Maximum short term SPL on axis, half space 80Hz to 2.5kHz - 109 dB SPL @ 1m
Residual Noise (maximum gain, 600 ohms source, 20Hz-20kHz bandwidth) - <8 dB SPL @ 1m
Rated Line Input Voltage and Power Power Consumption Standby mode - 12 watts
Quiescent (idle) - 20 watts
Musical Program, Loud mix - 105 watts
Both channels driven into resistive loading to 1% clipping (LF 86 W/4 ohms source, 20Hz-20kHz bandwidth) - 255 watts
US - 120 VAC, 60Hz
Europe - 240 VAC, 50Hz
Korea (AC Power Selector at 240V) - 220 VAC, 60Hz
Japan (AC Power Selector at 120V) - 100 V, 50-60 Hz
Rated Power (For UL-6500, CSA-E65-94, EN-60065) - 130 watts
Amplifier Section Low-frequency power amplifier   Rated Power (at 1kHz with 1% THD) - 100 watts
  In Japan (100 VAC) - 67 watts
  Rated Load Impedance - 4 ohms
  Slew Rate - 15V/uS
  Distortion (THD, SMPTE IMD, DIM 100) - <0.035%
  Signal-to-Noise (20Hz-20kHz, unweighted, referenced to 100W into 4 ohms) - > 101 dB
  Cooling - Convection
  Design - Monolithic IC, Class AB, Parametric Servo Feedback
High-frequency power amplifier
Rated Power (at 1Khz with 1% THD) - 40 watts
In Japan (100 VAC) - 28 watts
Rated Load Impedance - 8 ohms
  Slew Rate - 15V/Us
  Distortion (THD, SMPTE IMD, DIM 100) - <0.035%
  Signal-to-Noise (20Hz-20kHz, unweighted, referenced to 40W into 8 ohms) - >93 dB
  Cooling - Convection
  Design - Monolith IC, Conventional Class AB
System Specifications Input Type - Balanced Differential (XLR and 1/4" TRS) Unbalanced (RCA)
Input Impedance - 20k ohms Balanced 10k ohms Unbalanced
Input Protection - RFI and Level Protected
Input Sensitivity -  +4 dBu @ 300Hz for full output
Maximum Input Level -   +20 dBu
Low Cut Frequency - 80Hz, 2nd Order, Butterworth
HF Equalization - Shelving ±2 dB @10kHz
Acoustic Space A position-    -4 dB @40Hz, shelving
B position -    -2 dB @ 40 Hz, shelving
C position - flat
Compressor - Independent high and low frequency overload detection
Enclosure Alignment - 6th Order
Over Excursion Prevention - 2nd Order High-Pass Filter
Low Line Voltage Shut Down - 67% of Nominal Line
Thermal Protection - Amplifier Shut-Down, Auto Reset
Muting - 5 seconds at turn-on
Signal Sense Threshold -     -74 dBu (0.155mV)
Driver Protection - Compressor with independent LF and HF overload detection       

Напишете мнение

Забележка: HTML не се потдържа!
Лош Добър
Тест за сигурност
Етикети: Mackie HR626

От същата марка

Mackie 2404 VLZ4
Безплатна доставка
Mackie 402 VLZ4
Безплатна доставка
Mackie 802-VLZ3
Безплатна доставка